ModeL XD80
The X-ray Output Detector provides a means of calibrating and trouble shooting x-ray generators. The Detector output is designed to be connected directly to an oscilloscope. The x-ray waveform can be observed to find a wide variety of problems inherent in x-rays. X-ray waveforms can be documented by using a digital scope, a storage scope or an oscilloscope camera.
The detector is simply placed in the x-ray beam, then the BNC connector on the end of the cable is connected to a standard oscilloscope. The resulting oscilloscope display represents the intensity-time relationship of the x-ray beam.
The detector is weighted to make it easy to place under the x-ray.
Features
- Two Year Warranty
- Attached 6 foot cable
- Weighted enclosure
- Compact Design
Applications
- Measurement of Exposure
- Quality Assurance
- Verification of X-ray Operation
- X-ray Calibration
- Documentation
- Troubleshooting and Repair of x-ray
Specifications
OUTPUT- 200 mV peak minimum
- X-ray at 80 kVp, 50 mA, head 15 cm (6") above detector
- 100k Ohms
- Oscilloscope Impedance is typically 1 or 10 MOhm
- 1.8 meter minimum
- 52 x 34 x 15 mm (2.1 x 1.3 x .6")
- Standard BNC
Please contact ECC for pricing and ordering information.