Model 710
The ECC Model 710 Electronic X-Ray Detector is used for instant verification of x-ray operation. The ECC Model 710 is a simple, easy to use instrument designed for service personnel, quality assurance or anyone testing x-rays. The Model 710 is perfect for trouble-shooting and repair of dental, radiographic and fluoroscopic x-rays.
The instrument has a contact closure that can drive any external device, such as a computer used to acquire images during or after an x-ray.
The Model 710 is very easy to use, simply place the Model 710 in the x-ray field. Step back, take the exposure and then observe. The red LED will illuminate when an x-ray is present. There is also a beeping feature that gives you an audible cue when the x-ray is present.
Features
- Quick Verification Test
- Easy to use
- Limits Exposure to X-Ray
- Inexpensive
- Non invasive
- Compact Size
- Two Year Warranty
Applications
- Verification of x-ray operation
- Quality Assurance
- Troubleshooting and repair of x-rays
- Acquiring computer images
- Relay contact during or after x-ray
- Driving external devices during x-ray
- Warning Light
- Audible Alarm
- Safety Interlocks
- Eliminates the need for fluorescent paper or film intensifying screens
- Click here for an Application Guide
Specifications
- 25-150 kV
- 50 millisec
- 5 mA at 25 kV, 20 cm from x-ray
- Also depends on focus
- Red LED during x-ray
- ON/OFF Switch - slide
- Power Indicator - green LED turns red for low battery
- 0.5 Amps maximum switching
- 1.5 Amps maximum carrying
- 200VDC Switching Voltage maximum
- Standard 9 Volt Battery
- Replaceable without tools
- Low battery indicator
- 48 Hours continuous
- Typically 9 months of normal use
- 2 Years from ship date
- 2.65 X 4.4 X 1.1 inches
- 2 ounces
- None for normal use
- 3.5mm Jack for relay output
Please contact ECC for pricing and ordering information.